Skip to content
English
  • There are no suggestions because the search field is empty.

Responding to Access to Information Requests

An access to information request rarely points to one place. A requester asks for every record about a person, a project or a decision over a period of time, and those records are spread across file shares, SharePoint Online sites, OneDrive accounts, mailboxes and Teams. Requests often come with a statutory deadline and cover records in any form, so the first days tend to go on working out where to look.

Shinydocs Pro keeps one inventory of the content in every source you add. A request coordinator can search it by name, place, date and folder, narrow it to what the request covers, see which records hold personal information that needs review, keep the search for later, mark the responsive records and produce a list of them. An administrator can also gather copies of those records into one folder for review.

This guide follows that work in order, using an example request, FOI-2026-014, for records about Jane Doe created from January 2020 to December 2025. The same steps apply to other requests for records, such as a subject access request.

Set up before requests arrive

Shinydocs Pro can only find what it has already analyzed, and each source has to finish an update before its records show up. Set these up once, well before the first request.

Add every place records are kept

Add a source for each place a request can reach: file shares, SharePoint Online, OneDrive, Exchange Online and Teams. For the Microsoft sources, see Configure Shinydocs Pro Control Center for Microsoft Sources (OneDrive, Teams, SharePoint Online, Exchange Online).

Two defaults matter for requests:

  • A Microsoft Teams source brings in the files shared in channels and chats, not the messages themselves. To include the messages, contact Shinydocs Support about the Crawl Teams Chats feature flag.
  • A Microsoft Exchange Online source leaves out Deleted Items, Junk Email and Drafts, and never reads Outbox or Snoozed.

Turn on the analyses requests rely on

A new source only crawls until you choose its analyses. For request work, turn on:

  • People, places & organizations: finds the names of people, places and organizations in each file’s text, so you can find records that mention a person even when the name isn’t in the file name.
  • Personal & sensitive information: flags files that hold things like social insurance or card numbers, so you can see which records need review before release.
  • File fingerprints: matches identical copies across every source, so you can review one copy of each file.
  1. Go to Settings > Analysis and stay on the General tab.
  2. In the list on the left, choose Default for every source, a connector for every source of that type, or one source.
  3. Turn on the analyses above. Turning on an analysis that reads text also turns on Reading file contents.
  4. Select Review & save, then Save changes.

Each source runs them from its next update. To start straight away, open the source on the Sources page and select Run now. Choose the rules that flag personal information under Settings > Analysis > PII; see Detecting Potential PII and PSI using Shinydocs Pro.


Long documents. By default, Shinydocs Pro keeps the first 30,000 characters of each file’s text. Names, personal information and words past that point aren’t found, by the analyses or by Search. If your records include long reports or transcripts, an administrator can raise Text kept per file under Settings > Analysis > Extraction. A higher limit makes the index larger, and it applies to files read from then on. See Analysis Settings - General and Extraction.

Decide who uses Search and who uses the Catalog

Shinydocs Pro gives you two ways in, and they show different things.

Shinydocs Search Catalog
Who can use it People in Search groups or Search roles Control Center users: administrators, and people in Control Center Analyst groups or roles
What each person sees For sources set to Protected, only the items that person can open in the source Every item in every source, whatever the source’s own permissions
Words inside files Always searched Not searched by default. Finds files by name, path, owner, document properties and the people and places found in their text
Dates Last modified, from the past hour to the past year Exact ranges on Created, Modified or any other date
Other filters File extension and source Any field, including source, folder, file type, people, personal information, duplicates and tags
Keeping and acting on results Results load 10 at a time Item count, saved filters, tags, reports and downloads

Give the request coordinator Catalog access and work each request there: it covers every source, whoever can open the files, and it’s where you narrow, save, tag, report and download. Because the Catalog shows everything, give it only to people who may see every record.

  • Under Settings > Access, add coordinators to Control Center Analyst groups (or Control Center Analyst roles). Analysts can use the Catalog, tag files and create reports. They can’t download or dispose of files, or open Settings.
  • Fill in Control Center groups (or roles) with your administrators. While it’s empty, everyone who signs in is an administrator.
  • Use Shinydocs Search to find records by what they say. Staff in each program area can run the same search, and each sees only the records they can open. For their results to be checked against the source’s permissions, set each connection’s Search Authentication Type to a Protected option.

See Access and Authentication in Shinydocs Pro and Getting Started with Search.

Turn on tagging and downloads

  • Tagging marks the responsive records. It needs the Tagging in Catalog feature flag, which is off by default. An administrator turns it on at https://<your Control Center address>/settings/flags; Feature flags isn’t in the Settings menu. See Tagging items in the Shinydocs Pro Catalog.
  • Downloading copies needs the Document Mobility add-on on your license, an administrator to run it, and a download directory set under Settings > Actions. Without the directory, the Download action shows No download directory is configured yet. See Action Settings - Downloads and Reports and How To Update Your Shinydocs Pro License.


Before you change a feature flag. A flag applies to every user, and some flags can change or remove data. Turn on only the flags a Shinydocs guide or Shinydocs Support tells you to, and leave the rest at Default.

Find the records

Start wide. A long list is easier to narrow than a short one is to check for what it missed.

Search the Catalog for a person

  1. In Control Center, select Catalog.
  2. In the search box, type the person’s name in quotation marks, for example "Jane Doe", and select Search.

The name is looked for in each file’s name, path and owner, in document properties such as title and author, in the sender and recipients of email files, and in the names of people and places found in the file’s text. Administrators choose these fields under Settings > Keyword.

People write names in different ways. To search several forms at once, select </> at the start of the search box and write a query, for example "Jane Doe" OR "J. Doe" OR jdoe, then select Run. See Catalog - Advanced Search.

Find records whose text names a person

The People, places & organizations analysis stores the names of people it finds in a field called entities-person, and places in entities-location. To keep only files whose text names the person, use a query such as entities-person:"Jane Doe".

You can also show the field as a column: select Columns, the icon at the right end of the column headings, type entities-person and tick it. Then select the column’s heading and choose Filter by condition > Contains.

Names are found automatically. Some are missed and some other words are taken for names, so use this to add to your search, not to replace it.

Find email to or from a person

In an Exchange Online source, each message’s subject is its name, and its sender and recipients are in the fields fromAddress, toRecipients and ccRecipients. For example:

fromAddress:"jane.doe@contoso.com" OR toRecipients:"jane.doe@contoso.com" OR ccRecipients:"jane.doe@contoso.com"

For every field Shinydocs Pro records, see Metadata captured during content analysis.

Find records by what they say

To find records by the words inside them, use Shinydocs Search.

  1. Select Search (the magnifying glass) in the left-hand rail.
  2. Type the words, or a phrase in quotation marks such as "noise restriction", and press Enter.
  3. To narrow the results, select Filters and choose from Last modified, Filter by extension and Filter by source, then select Search.

Search shows each person only what they can open in the source, so your results depend on your own access. It lists results 10 at a time and can’t save, tag or report on them. Use it to learn which folders, people and dates a request involves, then build the request in the Catalog.

If your organization uses the AI Overview, it’s written from at most 12 of the best-matching documents. Use it to point you to records, never to decide that you’ve found them all. See Using Streamlined Search.

Narrow to what the request covers

Filters on different columns combine, and the count beside Catalog shows how many items match. Active filters show above the table; select × on one to remove it.

Unknown Attachment

Dates

  1. Select the Created column heading. For the last modified date, first add Modified with Columns.
  2. Choose Filter by condition > Between, or Is before or Is after.
  3. Enter the dates, or choose a shortcut such as Last year, then select Apply.

Unknown Attachment

These are the dates the source system records. In a query, use creationTimeUtc for Created and lastWriteTimeUtc for Modified, for example creationTimeUtc:[2020-01-01 TO 2025-12-31].

Sources

Select the Source column heading and choose Filter by values > Is any of, then tick the sources the request covers, for example the Planning file share and the Planning mailbox.

Folders

To keep one folder and everything below it, write a query on path.keyword. Type each backslash in the path as two, and put a backslash before each space:

path.keyword:*\\Planning\\Zoning\\*
path.keyword:*\\Bylaw\ Enforcement\\*

path.keyword matches upper and lower case exactly; path.normalized ignores case. These examples are for file shares. Other sources write paths differently, so check the path shown under a file’s name first.

File types

Use a query such as extension:(eml OR chat OR pdf OR docx). Exchange Online messages have the extension eml, and Teams messages chat.

One copy of each file

With File fingerprints on, identical files are matched across every source. To review one copy of each, select the Duplicates column heading and choose Filter by values > Is none of > Duplicate. The Catalog keeps files that have no copies and, for files that do, the earliest copy by creation date, marked Has duplicate.

Because copies are matched across every source, the earliest copy may be in a source you’ve filtered out. If your list has to account for every copy, remove this filter before you tag the records or create the report.

Check for personal information before release

With Personal & sensitive information on, each file is checked against your applied rules, and the PII column shows the kinds of personal information each file appears to hold.

  1. Select the PII column heading.
  2. Choose Filter by condition > Is not empty to keep every file with a match, or Filter by values > Is any of to pick kinds, such as Canadian Social Insurance Number.

The rules look for patterns such as identification and card numbers. They don’t judge everything else in a record that may be personal, so treat the PII column as a starting point for review. The entities-person column shows which people a record names.


Shinydocs Pro doesn’t redact. It flags files that may need review and leaves your records unchanged. Review and redact copies in the tool your organization uses for that.

Keep the request’s search

Save the filters, so you or a colleague can come back to the request and run it again as sources update.

  1. With the request’s filters in place, select the save icon beside Saved filters.
  2. Replace the suggested name with the request number, for example FOI-2026-014. The suggested name is built from your filters, so it can include the requester’s name.
  3. Turn on Private to keep the filter out of other people’s lists, then select Save.

Unknown Attachment

To come back to the request, open Saved filters and choose it. A filter that isn’t private is listed for every Control Center user, and only the person who saved it can change it. When you change a saved filter, the save icon offers to update it, Save as a new filter or Revert to saved.

A saved filter keeps the filters, not the results. Each time you open it, it shows what matches now.

To send the filters to a colleague, open the menu beside Clear filters and choose Copy link to these filters. The link holds the filters themselves, including any name you searched for, and it opens only for people with Control Center access.

Mark the responsive records

Tag the records you decide are responsive. The request then has its own list that you can filter, report on and add to.

  1. Filter the Catalog to the records, or tick them. With nothing ticked, an action covers every item that matches the filters; the Action button shows how many.
  2. Select Action, then Tag, and check that Add tag is selected.
  3. In Tag name, type foi-request. In Value to assign, type the request number, FOI-2026-014.
  4. Select Start tagging.

Unknown Attachment

Tagging runs in the background; follow it under View activity > Tagging. The tag is kept in Shinydocs Pro, not in the source system, in a field called tag-foi-request. A record that answers a second request keeps both numbers when you tag it again.

To see the request’s records later, select Columns and tick tag-foi-request. Then select its heading, choose Filter by values > Is any of and type FOI-2026-014. To take the tag off records you rule out, use Remove tag; see Tagging items in the Shinydocs Pro Catalog.

Create the list of responsive records

A report is a list, in CSV files, of the files that match the Catalog’s filters, with their name, path, source and other fields. Anyone who can use Control Center can create one.

  1. Filter the Catalog to the request’s tag, or tick the rows you want.
  2. Select Action, then Report.
  3. Open Additional options and replace the suggested Report name (optional) with the request number. Like a saved filter’s name, it’s built from your filters and becomes part of the file name.
  4. Select Next and follow the prompts to start the report.
  5. When it finishes, select View activity and, on the Remediation tab, download the zip file from the Result column.

Unknown Attachment


Export all fields is ticked by default. A report with all fields includes pii_matches, the text each personal information rule matched, such as an identification number itself. Untick it to export only the columns you can see, and store and share the report as carefully as the records it lists.

For more about reports and View activity, see Getting to Know Content Catalog & Creating Reports in Shinydocs Pro.

Gather copies for review

An administrator can copy the responsive records into one folder, so reviewers work on copies and the originals stay where they are.

  1. Filter the Catalog to the request’s tag.
  2. Select Action, then Download.
  3. To get PDFs for review, tick Convert to PDF where possible. Word, Excel, PowerPoint, Visio, CAD, email, image, text and web page files are converted; anything else is saved in its original format and noted in the manifest.
  4. Optionally, enter an address in Email when completed. It works once a mail server is set up under Settings > Email.
  5. Open Additional options and name the download after the request, then select Next and follow the prompts.

Shinydocs Pro writes the copies to the download directory set under Settings > Actions, in a folder for the job, as {source}\{original folder path}\{file name}. A manifest CSV beside them records what happened to each file. The files are read with each source’s own service account, not with your permissions.

When the job is complete, View activity lists the package to download and its manifest. The manifest stays available after the retention settings under Settings > Actions remove the copies.

What Shinydocs Pro doesn’t do

  • It doesn’t decide which records are responsive or what must be withheld. Your team does; the analyses help you find and sort.
  • It doesn’t redact. Nothing in this guide changes records in their sources: tags stay in Shinydocs Pro, and downloads are copies.
  • It doesn’t track requests, deadlines, fees or correspondence with requesters. Keep those in your own request process, and use the request number to link the two.
  • It doesn’t assemble a release package or send anything to a requester.
  • It only knows the sources you’ve added, as of each source’s last update. Files added or changed since then appear after the next update, and files removed from a source drop out of the Catalog. Paper records and systems you haven’t added aren’t included.
  • It reads each file’s text up to the Text kept per file limit, and only for file types it can read. Files it can’t read, such as password-protected files, can be found only by their name, path and properties.
  • Only administrators can download copies, and only with the Document Mobility add-on.

Let’s review

With Shinydocs Pro set up before requests arrive, a request coordinator can:

  • Find records about a person across every source by name, by the people named in their text, and by email sender and recipient
  • Find records by what they say with Shinydocs Search, then build the request in the Catalog
  • Narrow to the request’s dates, sources, folders and file types, with one copy of each file
  • See which records hold personal information that needs review before release
  • Save the request’s filters, tag the responsive records and produce a list of them
  • Have an administrator gather copies for review, with a manifest of what was copied

The decisions about each record, and the request’s deadlines, stay with your team.